Ok, I have been working on this one for about two hours. The documentation I found online was not very helpful, so this is what I came up with.
Using the web interface:
Configure > System Settings > SNMPv3
Username: myrvrbed (lower case)
Authentication Protocol: SHA
Authentication: Supply a password
Password: A2B@CDE#fg (names and places changed to protect the innocent, 8-10 characters)
Password Confirm: A2B@CDE#fg (names and places changed to protect the innocent, 8-10 characters)
Use Privacy Option: (Check the box)
Privacy Protocol: AES (Actually AES-128)
Privacy: Supply a Password
Privacy Password: S2T@uve#XY (names and places changed to protect the innocent, 8-10 characters)
Privacy Password Confirmed: S2T@uve#XY (names and places changed to protect the innocent, 8-10 characters)
Configure > System Settings > SNMP ACLs
Security Names:
Security Name: MYSWOR
Community String: M1N@opq#ST
Source IP Address and Mask Bits: 10.10.10.10/32
Groups:
Group Name: MYGROUP
Security Model and Name Pairs: usm myrvrbed
Views:
View Name: NPMisIT
includes: .1
Access Polices
Group Name: MYGROUP
Security Level: authpriv
Read view: NPMisIT
Hope this helps. Please feel free to added or correct.